Resources · Brand Kit

The MPC mark, and the rules that keep it itself.

Everything needed to represent MPC accurately in coverage, research, exchange listings, and partner material: logo files, the colour system, typefaces, and the constraints that apply to all of them.

Downloads

Every asset, in one archive

SVG for anything that scales: print, signage, decks. PNG at 1x/2x/3x for anything that does not. Both archives carry all sixteen files: four shapes across four background treatments.

Usage Rules

What holds the mark together

These are the constraints that keep the mark legible wherever it lands. Anything not listed here as forbidden is fine.

1×0.5×
Clearspace: 0.5× the mark's height on every side
Clearspace
0.5× the mark's height on all sides, except in icon tiles, fixed headers and the compact lockup, which have their own rows below
The crystal's facets are thin lines; anything closer starts competing with them.
Minimum size: mark
24px digital · 10mm print
Below this the interior facets close up and the mark reads as a solid diamond.
Minimum size: horizontal lockup
120px wide digital · 32mm print
The wordmark's counters fill in below this width.
Stacked lockup
Use above 96px wide only
Two elements at small sizes lose the relationship the lockup exists to show.
Lockup gap
0.30× the mark's height between the mark and the wordmark
Measured from the released horizontal lockup: the mark is 50.74 wide and 64 high, and the wordmark starts at x = 69.94, 19.20 to its right. A consumer that assembles the lockup itself checks against this number instead of reverse-engineering the SVG.
Lockup wordmark
Wordmark height 0.44× the mark's height, centred on the mark's vertical centre
In the released horizontal lockup the wordmark outline runs from y = 17.92 to 46.08 (28.16 high) against a 64-high mark, both centred on y = 32. Any other size or baseline is a different lockup.
Clearspace: icon tiles
Inside an icon tile (favicon, touch and app icons): 0.5× the mark's height from a 48px tile up; at least 0.15× from 32px to 47px; below 32px the mark keeps 24px and takes whatever space is left. Below 24px nothing meets the minimum until the small variant exists
The tile is the mark's own ground, not neighbouring content. 0.5× clearspace and the 24px minimum hold together only from a 48px tile (24 × 2); a 32px tile at 0.5× leaves a 16px mark. 0.15× holds with a 24px mark from a 31.2px tile (24 × 1.3), so 32px is the first whole size where both rules fit. Below that, size wins so the mark stays legible in a browser tab; a 24px tile carries the mark edge to edge.
Clearspace: fixed headers
When a header bar shows the horizontal lockup file and is shorter than the lockup plus its clearspace: at least 0.125× the mark's height above and below; 0.5× to the side. Most headers use the compact lockup instead (next row)
A 120px lockup is about 50px high and needs a bar about 100px tall for full clearspace, which would push every page down. The bar's own edge is not competing content; the neighbour that is (the tagline or the menu) keeps the full 0.5× to the side.
Compact lockup: headers and footers
In a header bar or a footer, the mark may stand beside "MPC" set as text instead of the horizontal lockup file: the mark file rendered 24 to 28px tall, "MPC" in the display face at weight 600 and 16px (or the wordmark file at the same height), 8 to 14px apart, both centred on one line. 0.5× the mark's height of clearspace to the side. The 120px lockup minimum and the lockup gap and wordmark ratios above do not apply to it
At its 120px minimum the horizontal lockup is about 50px high, nearly all of a 64px bar. The product headers were built with the compact form from launch: homepage (28px mark, 16px "MPC", 10px apart), registry (28px, 8px) and Unity (28px, wordmark file); it is the approved header and footer logo, not a resized lockup. A 28px mark in a 64px bar keeps 18px above and below, more than its 0.5× clearspace.

Do not

  • Rotate, skew, or otherwise distort the mark.
  • Change stroke weights or redraw the interior facets.
  • Add shadows, glows, outlines, or bevels.
  • Recolour the mark outside the copper scale.
  • Place the full-colour mark on photography; use a mono variant.
  • Rearrange, resize, or re-space the mark against the wordmark, except as the compact lockup in headers and footers.
  • Set the wordmark in a substitute typeface.
Color

A copper scale, not a copper

Copper appears at four values because paper and a near-black interface need different ones to clear the same contrast bar. Each stop names the surface it belongs to. Click any value to copy it.

Copper Scale

MPC's brand colour, one hue across four surfaces. Never substitute one stop for another: each is the value that clears WCAG AA on the surface it names.

Surface & Ink

Screen surfaces run near-black and cool; print surfaces run paper-white and warm-neutral. Keep the two sets apart.

Accent

Used sparingly and always with meaning attached, never for decoration.

Typography

Three faces, three jobs

All three are self-hosted on the site and licensed under the SIL Open Font License, so they can be used in partner and press material without a licence purchase.

  • Space Grotesk400 · 500 · 600 · 700SIL Open Font License 1.1

    Display: headlines, the wordmark, and figures.

    Mining RWA Issuance Infrastructure

  • Inter400 · 500 · 600SIL Open Font License 1.1

    Sans: body copy and interface text.

    Institutional-grade real-world assets, on-chain.

  • JetBrains Mono400 · 500SIL Open Font License 1.1

    Mono: eyebrow labels (11px, 0.18em tracking, uppercase) and data.

    TSAGAAN TOLGOI · BNB CHAIN · 2026

Trademark

What you may do with the mark

The MPC name and mark may be reproduced unaltered in news coverage, research, exchange listings, and partner material. Any modified, combined, or product-branded use, or any use implying endorsement or a partnership that does not exist, requires prior written permission. Requests go through the contact form on the home page.

Wording pending legal review.